7 internal connectors, 1 dc power internal connector (int12v – j7), Internal connectors – Kontron mITX-E38 User Manual
Page 24: Dc power internal connector (int12v – j7), 7internal connectors
KTD-N0903-A
Page 22
Internal Connectors
mITX-E38 Users Guide
7
Internal Connectors
DC Power Internal Connector (Int12V – J7)
7.1
The mITX-E38 has an internal power input connector for supplying voltage in the range from +11.4V to
+12.6V. The power connector is a 4 pin 12V ATX connector type Lotes ABA-POW-003-K02 or similar.
Header
Pin
Signal
Description
1
GND
Ground
2
GND
Ground
3
12V
Power supply +12V
4
12V
Power supply +12V
Warning: Hot Plugging power supply is not supported. Hot plugging might damage the board.
Available cable kit:
PN 1052-5814 Cable ATX Power for KTA70M, 200mm long.
Notes:
To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
Alternatively the DC Power External Connector can be used