Kontron mITX-E38 - Manual (Page 15)

KTD-N0903-A Page 13 System Specification
mITX-E38 Users Guide
Power Consumption 3.4
The following items were used in the test setup:
mITX-E38 Low Power Setup:
Standard system configuration equipped with Internal graphics, 1x SATA disks, Intel E3815CPU , 1x
SODIMM (2GB Module), DP Monitor, PS2 Keyboard & Mouse,1x 16GB USB 3.0 Stick, Passive heat-sink, +12V
PSU.
mITX-E38 High Power Setup:
Standard system configuration equipped with 1x PCI express LAN Card, mPCIE Wifi Card, 2x SATA disks,
Intel E3845 CPU, 1x SODIMM (4GB Modules), DP Monitor, PS2 Keyboard & Mouse, 1x 16GB USB 3.0 Stick, 2x
16GB USB 2.0 Sticks, 12V active cooler, +12V PSU.
The principal test system and test equipment used
1. Fluke 289
2. Fluke 179
3. ATX rail switch Configured as 12V only
Power measurrements:
Low Power Setup (E3815) High Power Setup (E3845)
Windows 7 – Idle
424mA – 5.20W 836mA – 10.22W
Windows 7 – 3DMark2006
608mA – 7.46W 1214mA – 14.81W
Windows 7 – Intel TAT 100% all CPU cores and GFX
487mA – 5.98W 1138mA – 13.87W
Windows 7 – S3 (Sleep)
89mA – 1.13W 121mA – 1.54W
Windows 7 – S5 (Shutdown)
72mA – 0.92W 101mA – 1.29W
12V
mITX-E38 PSU
Gnd
Current
Probe
Note that power consumption of the
Display and HDD are not included.