Netbootloader vmp1 – Kontron VMP1 with Netbootloader User Manual

Page 90

NetBootLoader

VMP1

Page 5 - 24

ID 26037, Rev. 01

PA S S W D

FUNCTION:

Set the telnet password

SYNTAX:

passwd [-f | -d]

where:

passwd

command

-f

option:

if password is not known

-d

option: disable

disable telnet login (remote access)

DESCRIPTION:

To set the password for telnet sessions with the NetBootLoader the
command “passwd” is used. This command is interactive, meaning
that after it is issued, the NetBootLoader responds with an
appropriate request to the operator which must be properly
acknowledged or the operation fails (refer to USAGE below).

To set the password in the event it is unknown, use the option “-f”.
This is can only be accomplished from the TERM interface and not
from the Ethernet interface.

With the option “-d”, the remote telnet login can be disabled by
invalidating the password.

USAGE:

Set password

COMMAND / RESPONSE:

NetBtLd> passwd

Old Password: *****

New Password: *****

Type again

: *****

NetBtLd>

(The old password must be known)

Set password when the old password is not known