Kontron VMP1 with Netbootloader - Manual (Page 31)

VMP1 Functional Description
ID 26037, Rev. 01 Page 2 - 9 ® 2002 PEP Modular Computers GmbH
2.4.3 Board Interfaces
2.4.3.1 VME Interface and Pinout
The VME interface is based on the TUNDRA UNIVERSE II Bridge,
which includes the following features required for 3U VME systems:
• A24/A16 addressing modes capability
• D16/D8 data transfer capability
• Automatic First-Slot-Detection
• Single level BR3 arbitration release-when-done option
• FAIR VMEbus arbitration option
• ACFAIL NMI option
• SYSFAIL IRQ option
• System controller functions (SYSCLK, Bus monitor, Power monitor)
• Compatibility with PEP 3U VME system addressing schemes
• Compatibility with PEP VME backplane design and feature set
• Compatibility with PEP backplane transceiver logic
A table showing the pinout of the VME bus connector
appears on the following page.
PINROWS
1
32
A B C