Kontron VMP1 with Netbootloader - Manual (Page 56)

VMP1 Configuration
ID 26037, Rev. 01 Page 4 - 10 ® 2002 PEP Modular Computers GmbH
4.3.4 Special Registers Overview
The Special Registers may be attached through read and write operation to the address
space FFe8 0000-FFF0 0000
4.3.4.1 Board Control Registers
4.3.4.2 Board ID Register
The Board ID can be used to identify the VMP1 in a VME system. The value for the
VMP1 is 00h.
• This register is READ ONLY
4.3.4.3 Software Compatibility ID
The Software Compatibility ID will signal to the software when differences in hardware
require different handling by the software. This register is READ ONLY. It starts with the
value 0x00 and will be incremented with each change in hardware (software sensitive
only).
Table 4-6: Board Control Registers
Register Address Read/Write
Board-ID FFe0 0010 R
Software Compatibility ID FFe0 0012 R
Memory Configuration FFe0 0014 R
Flash Bank Select FFe0 0016 R/W
Watchdog Control Register FFe0 0018 R/W
Control Register FFe0 001a R/W
Event Register FFe0 001c R/W
Board/Logic Revision FFe0 001e R
Table 4-7: Board ID Register
Register Address MSB 6 5 4 3 2 1 LSB
Board ID FFe0 0010 BID7 BID6 BID5 BID4 BID3 BID2 BID1 BID0
Table 4-8: Software Compatibility ID
Register Address MSB 6 5 4 3 2 1 LSB
Software Compatibility ID FFe0 0012 SC7 SC6 SC5 SC4 SC3 SC2 SC1 SC0