2 ordering information – Kontron VM62 User Manual
Page 8

Chapter 1 Introduction
VM62(A) / VM42(A) User’s Manual
1.2 Ordering Information
Name
Description
Order No
VM62-BASE
VMEbus single board computer comprising MC68060 @ 50 MHz,
MC68EN360 @ 25 MHz, 256 kByte dual-ported SRAM (with Gold Cap for
backup), configured for use with the AutoBahn interface piggyback, up to 6
serial interfaces (2 available on the front panel as RS232 and an additional 4
divided between the CXC interface and SI-Interface), CXC Interface, PEPbug.
12349
VM62-BASE
Same as order no. 12349 but with 1 MByte dual-ported SRAM
12350
VM42-BASE
VMEbus single board computer comprising MC68040 @ 33 MHz,
MC68EN360 @ 33 MHz, 256 kByte dual-ported SRAM (with Gold Cap for
backup), configured for use with the AutoBahn interface piggyback, 6 serial
interfaces (2 available on the front panel as RS232 and an additional 4 divided
between the CXC interface and SI-Interface), CXC Interface, PEPbug.
12344
VM42-BASE
Same as order no. 12344 but with 1 MByte dual-ported SRAM
12345
VM42-BASE
Same as order no. 12344 but with MC68040V @ 33 MHz (3.3-V technology)
12346
VM42-BASE
Same as order no. 12346 but with 1 MByte dual-ported SRAM
12347
DM600
Memory piggyback with 4 MByte DRAM and 1 MByte Flash EPROM
11852
DM600
Memory piggyback with 4 MByte DRAM and 4 MByte Flash EPROM
11853
DM601
Memory piggyback with 16 MByte DRAM and 1 MByte Flash EPROM
11854
DM601
Memory piggyback with 16 MByte DRAM and 4 MByte Flash EPROM
11855
DM602
Memory piggyback with 1 MByte DRAM and 1 MByte Flash EPROM
12765
DM603
Memory piggyback with 32 MByte DRAM and 512 kByte Flash EPROM
13027
DM603
Memory piggyback with 32 MByte DRAM and 2 MByte Flash EPROM
13627
SI-10B2
10Base2 (Thin) Ethernet (cheapernet) interface with RG58 (coax) connector
9925
SI-10B5
10Base5 (AUI) Ethernet interface piggyback with 15-pin D-Sub connector
9924
SI-10BT
10BaseT (Twisted pair) Ethernet interface piggyback with RJ45 connector
9926
SI-DUMMY
Front panel only fitted when no SI piggyback required
12351
SI-PB232
Serial interface piggyback for 2 RS232 connections (Modem interface) with 2
RJ45 connectors
11850
SI-PB232-ISO
Serial interface piggyback for 1 RS232 optoisolated connection with 1 RJ45
connector (Available in 1996 if requested)
11851
SI-PBPRO
RS485 optoisolated interface piggyback for 2 wire half-duplex (PROFIBUS)
connection with 9-pin D-Sub connector
9927
MP-AB100
AutoBahn interface piggyback complete with all control logic, 128 kByte 32-
bit fast SRAM as buffer for AutoBahn data transfer with Spanceiver MC
100SX1451 of 50/100 MByte/s
9923
CABLE-VM42-
232
3 meter RS232 Serial Interface cable for VM42(A) / VM62(A) with 9-pin
female D-Sub (PC pinout) to RJ12 connector
12383
Page 1-2
© 1995 PEP Modular Computers
May 17, 1996