Kontron VM62 - Manual (Page 31)

Chapter 2 Functional Description VM62(A) / VM42(A) User’s Manual
Group Signal Name Mneumonic Function
SI SI Receive Data L1RXDA,
L1RXDB Serial input to the Time Division Multiplexed (TDM)
channel A or channel B
SI Transmit Data L1TXDA,
L1TXDB Serial output from the TDM channel A or channel B
SI Receive Clock L1RCLKA,
L1RCLKB Input receive clock to TDM channel A or channel B
SI Transmit Clock L1TCLKA,
L1TCLKB Input transmit clock to TDM channel A or channel B
SI Transmit Sync
Signals L1TSYNCA,
L1TSYNCB Input transmit data sync signal to TDM channel A or
channel B
SI Receive Sync
Signals L1RSYNCA,
L1RSYNCB Input receive data sync signal to TDM channel A or
channel B
IDL Interface
Request L1RQA, L1RQB IDL interface request to transmit on the D channel.
Output from the SI
SI Output Clock L1CLKOA,
L1CLKOB Output serial data rate clock. Can output a data rate
clock when the input clock is 2x the data rate
SI Data Strobes L1ST4-L1ST1 Serial data strobe outputs can be used to gate clocks to
external devices that do not have a biult-in Time Slot
Assigner (TSA)
BRG Baud Rate Generator
Out 4-1 BRGO4-BRGO1 Baud rate generator output clock allows baud rate
generator to be used externally
BRG Input Clock CLK2, CLK6 Baud rate generator input clock from which BRG will
derive the baud rates
PIP Port B 15-0 PB15-PB0 PIP Data I/O Pins
Strobe Out STRBO This input causes the PIP output data to be placed on
the PIP data pins
Strobe In STRBI This input causes data on the PIP data pins to be
latched by the PIP as input data
SDMA SDMA
Acknowledge 2-1 _SDACK2-
_SDACK1 SDMA output signals used in RISC receiver to mark
fields in the Ethernet receive frame
2.5.4 AutoBahn Interface
In preparation
Page 2-16 © 1995 PEP Modular Computers May 17, 1996