Kontron CP384 - Manual (Page 33)

ID 31440, Rev. 01 Kontron Modular Computers GmbH
P R E L I M I N A R Y
Rev
N
r. = CP384 -
31440_
01 - 060
503/
144
228
Page 2 - 3
Functional Description CP384
2. Functional Description
The following chapters present more detailed, board level information about the CP384 Digital
Input and Digital Output Controller whereby the board components and their basic functionality
are discussed in general.
2.1 General Information
The CP384 is comprised basically of the following:
• Digital input signal conditioning
• Digital output signal conditioning (2 Form C relays), external supply for the output cluster
• Optocouplers
• DIO ProComm Controller
• Controls digital inputs and outputs
• Provides interfacing to the CompactPCI bus
• System interfaces for:
• Front panel
• 16 channels of digital input and 8 channels of 3-pin digital output
• External supply connection for the digital output cluster
• External hardware reset for the digital output cluster
• One 62-pin, female, 3-pin row, D-sub connector (CON2)
• CompactPCI bus
• 132-pin, female, 6-pin row connector (CON1)
• CompactPCI specification
• Onboard memory: Capability EEPROM (CapROM)
• Monitor and Control
• Two operational status LEDs for user-defined purposes
• External reset
• Output failure indicators
• Software
2.2 Board Level Interfacing Diagram
The following figure demonstrates the interfacing structure between the internal processing
modules of the CP384 and other major CP384 system components. Where CP384 system el-
ements have common interfacing they are grouped into a block. Interfacing common to only
one element of a block is indicated with a direct connecting line. The interfacing lines are shown
in white where they are onboard and in black for board external interfacing.