Jeep 2015 Wrangler - Uconnect 730N Manual - Manual (Page 74)

NOTE:
If the disc is not removed within approximately ten
seconds, the unit pulls it back into the slot (park
position). The disc may be ejected when the ignition is
OFF.
3. Push the OPEN/CLOSE button on the faceplate to
close the display. The display will close automatically
within 30 seconds after the disc is removed.
Selecting Disc Mode
Toggle between the media and the radio menus by
pushing the RADIO/MEDIA button on the faceplate. The
disc mode can be selected by pressing the DISC button on
the touchscreen.
NOTE:
When a disc is inserted, the appropriate mode is auto-
matically selected once the disc is recognized.
Scan Search
Press the SCAN button on the touch-
screen.
The individual tracks of the disc will be played in
succession for ten seconds each.
Select the STOP SCAN button on the touchscreen to stop
the scan function.
Next Track
Press the SEEK up button on the touchscreen, the next
track on the disc is played. Once the last track has been
reached in the forward direction, the unit will loop back
to the first track.
Previous Track
Pushing the SEEK down button on the faceplate plays the
previous track. If the first track has been reached in the
5
Uconnect® MULTIMEDIA (MEDIA) 63