Jeep 2015 Wrangler - Uconnect 730N Manual - Manual (Page 165)

After pressing the map on the screen, a set of arrows
appears.
2. Use the arrows to navigate the center of the cross over
the desired destination.
3. Either press the SELECT button on the touchscreen to
select the destination, or press the POIs button on the
touchscreen to see a list of POIs in the selected area.
Destination Input By Saved Trails
Press the Saved Trails button on the touchscreen in the
Destination Entry menu.
NOTE:
The Saved Trails button on the touchscreen is disabled
if the trails memory is empty. To fill the trails memory,
you must save a trail.
154 Uconnect® GPS NAVIGATION