Jeep 2015 Wrangler - Uconnect 730N Manual - Manual (Page 171)

The Record Trail button on the touchscreen will switch to
the Stop Trail button on the touchscreen and the trail
appears as a yellow line on the map screen while you
drive along a route. Maneuver points (bread crumbs) are
marked as yellow dots. The start point is marked with a
green dot, the stop point is marked with a red dot.
3. Press the Stop Trail button on the touchscreen to stop
the trail recording.
• Press Discard Current Trail to discard the trail and
stop the recording.
• Press Continue Recording Trail to continue the re-
cording.
4. Press Stop and Save Current Trail.
160 Uconnect® GPS NAVIGATION