Jeep 2015 Wrangler - Uconnect 730N Manual - Manual (Page 73)

Inserting A Disc
1. Push the OPEN/CLOSE button on the faceplate once.
2. With the printed side upwards, insert the disc into the
disc slot of the radio. The radio pulls the disc in
automatically and closes the flip screen. The radio
selects the appropriate mode after the disc is recog-
nized, and starts playing the first track. The display
shows “Reading...” during this process.
NOTE:
A faulty CD is NOT automatically ejected. Use only
standard size discs. Discs that have been modified with
an adhesive label should not be used in the CD/DVD
player.
High definition content and media (e.g., HD-DVD, Blu-
Ray) is not supported.
If the user does not remove an ejected CD within
approximately 10 seconds, the CD will reload.
NOTE:
• On MP3 and WMA CDs with a large number of
songs, it may take several seconds to read, play,
and display information for all songs on the disc.
• Recording your own CD on a home computer at a
lower write speed will result in a more consistent
quality.
• Subfolders recorded on your own CD on a home
computer will also be recognized.
Removing A Disc From The Radio
1. Push the OPEN/CLOSE button on the faceplate.
2. The disc is ejected and can be removed.
62 Uconnect® MULTIMEDIA (MEDIA)