Jeep 2015 Wrangler - Uconnect 730N Manual - Manual (Page 119)

Connect a 3.5 mm stereo mini-jack cable as shown above
(not provided with the radio) to the AUX connector on
the navigation radio and to the earphone connector of
your audio device.
The display will switch automatically to the AUX mode
when a 3.5 mm stereo mini-jack cable has been connected.
The radio screen will revert back to the last tuner mode
when the cable is unplugged.
To change radio modes while the cable is connected to
the unit, press the RADIO/MEDIA button on the face-
plate until the AUX tab is displayed on the top of the
screen. Press the AUX tab to return to the AUX mode.
Adjust the volume with the ON/OFF VOLUME rotary
knob, or with the volume of the attached device.
The control of the external device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead.
NOTE:
Inserting a mono jack will result in improper audio
playback.
108 Uconnect® MULTIMEDIA (REMOTE DEVICES)