8 super io configuration – Habey PRO-6820 User Manual

Page 52

Text mode
Original mode

4.2.8 Super IO Configuration

Serial Port 1 Configuration

1) Serial Port
Enable or disable the serial port.
2) Device Setting (Read Only)
Display serial port IRQ and Base Address
3) Change Setting
This option is used to change serial port settings. System default setting:
[Auto].

Device Power-up Delay

Device Power-up Delay: Set the maximum delay time for USB device

report to Master controller.

USB Mass Storage Device

This option is used to set the USB device type connected, including

[Auto][Floppy][Forced FDD][Hard Disk][CD-ROM]. System default [Auto].