Habey PRO-6820 User Manual
Page 37
Section 4 BIOS SETUP
AMI BIOS Flash
BIOS functions as a bridge connecting hardware and operating system.
Hardware and software are upgrading all the time, so when your system
goes wrong, for example, your system can not support the newest CPU,
you need to upgrade BIOS to keep up with the latest technology.
AFUEFI.EXE is the FLASH IC program for BIOS to upgrade, which
needs to be run in DOS mode.
Please use a boot disk to load DOS, then run AFUEFI.EXE to upgrade
BIOS ( for example: write XXXX.ROM into FLASH IC )
Specific Command: C:\ AFUEFI ****.rom /P /B /N /X or C:\FPT -F ****.
BIN –BIOS
If you need to add other parameters after the order format, please add
Remark:
1. BIOS upgrading is only executed when it is necessary.
2. Please use the BIOS SETUP Utility in the CD-ROM provided by us or
downloads the latest version on related websites.
3. Please do not power off or reboot the system during BIOS upgrading,
otherwise, the BIOS maybe be damaged or system may not be able to
boot again.
4. After BIOS flash, please manually Load Default to optimize BIOS
settings.
5. Please backup your BIOS in advance.
AMI BIOS Description
When the computer is power on, BIOS will conduct self-diagnosis to its
hardware on motherboard and configure hardware parameter; finally
the operating system will take control. BIOS is the communication bridge
between hardware and O/S. Correct configuration of BIOS is critical for
maintaining system stability and its optimized performance.
BIOS Settings
1. Power on or restart the system, self-detection message will display on
the screen.
2. When system pops out the prompt “Press to enter setup,
to Popup menu “ , please press key to enter BIOS setup interface.
3. Use the “←↑→↓” to select the option which your want to modify, press
4. Use the “←↑→↓” and
modify BIOS Options that you choose.
32