ETS-Lindgren 4340 Digital Camera System (CCTV) (Archived) - Manual (Page 51)

Operation | 51
5. Open a second Internet Explorer browser window and type the
next IP address. Repeat this step until you open a browser window for
each camera on the network.
6. Arrange browser windows. Drag windows to desired location on
monitors. Re-size windows as required.
Setting Resolution & Frame Rate
For high frame rates (greater than 7.5 frames per second), do not
exceed 640x480 resolution.
1. Power up all cameras. Allow cameras to complete self-test routine.
2. Open Toshiba Camera Finder. Located in the Toshiba Network
Camera program group on your computer.
3. Click Search. This displays all cameras connected to the network,
including the name and IP address for each.
4. Click Administrator and enter user name and password. Logging in
as the administrator enables you to edit settings. The user name and
password are set by the camera manufacturer; see the
Toshiba Network Camera 1K-WB21A Advanced User's Guide for the
default user name and password.
5. Click Camera Settings and then click General. The settings window
will display.
6. Set Resolution to 640x480 and then click Save. Set and save the
resolution setting before setting the frame rate.
7. Set Frame Rate to 30 and then click Save. Set and save the
frame rate.
8. Close the settings window.
Archived 6/3/13