ETS-Lindgren 4340 Digital Camera System (CCTV) (Archived) - Manual (Page 47)

Computer Setup | 47
8.0 Computer Setup
Before connecting any components, follow the
safety information in the ETS-Lindgren
Product Information Bulletin included with your
shipment.
Minimum Computer Requirements
If you purchased a Model 4340 Digital Camera System (CCTV) configuration
from ETS-Lindgren that includes a personal computer, the following requirements
are met. If you plan to install a computer other than one provided by
ETS-Lindgren, verify that it meets these minimum requirements:
 Intel® Pentium® III 800 MHz or higher
 256 MB memory or more
 Microsoft® Windows® 2000 or XP operating system
 Internet Explorer® 6.0 or later
Setup the Computer
If you install a computer other than one provided by ETS-Lindgren,
see the Toshiba IK- WB21A Network Camera Advanced User’s Guide
for complete information on setting up the computer and IP address,
and installing additional software.
If you purchased a Model 4340 CCTV configuration from ETS-Lindgren that
includes a personal computer, follow these steps:
1. Follow the instructions included with the computer to set it up in the
desired location, and to connect the monitor, keyboard, and mouse.
2. Follow the computer instructions to connect the Ethernet cable and
power cables, and to connect the computer and monitor to power.
Archived 6/3/13