Multi-camera system, Additional pre-installation tasks, Installation tasks – ETS-Lindgren 4340 Digital Camera System (CCTV) (Archived) User Manual
Page 45: Archived 6/3/13
Install Optional Components
|
45
M
ULTI
-C
AMERA
S
YSTEM
—A
DDITIONAL
P
RE
-
INSTALLATION
T
ASKS
For a multi-camera configuration, you will need to install one
10/100 Ethernet filter per camera, in addition to mounting the cameras.
Install filters
— Follow the 10/100 Ethernet filter installation
instructions in the separate document, 10/100 Ethernet Filter
Installation Manual. They are not included in this document.
Mount cameras
—Follow the instructions to wall-mount or
ceiling-mount a camera on page 29.
If you have a shielded control room, also install fiber optic feedthrough
connectors in the wall of the control room.
M
ULTI
-C
AMERA
S
YSTEM
—I
NSTALLATION
T
ASKS
1.
Place the 10/100 network switch in the same location as the personal
computer.
2.
Plug the Ethernet cable from the computer into any of the numbered
connectors on the network switch.
Archived 6/3/13