ETS-Lindgren 4340 Digital Camera System (CCTV) (Archived) - Manual (Page 40)

40 | Install Optional Components
While performing the following steps, always protect
and support the camera and camera enclosure. Do
not roll, jar, or drop the camera and camera
enclosure. ETS-Lindgren is not responsible for
damage to the camera as a result of improper
handling.
1. Set up the tripod in the
chamber.
2. Remove the 3/8-in thread
center pole from the tripod by
rotating the height adjuster
knob to loosen, and then lifting
the pole up.
Archived 6/3/13