Viewing images from the camera, If the camera stops working, Arranging multi-camera images – ETS-Lindgren 4340 Digital Camera System (CCTV) (Archived) User Manual
Page 50: Archived 6/3/13
![background image](/manuals/636314/50/background.png)
50
|
Operation
Viewing Images from the Camera
When the camera is powered on, it will take up to one minute to
start up.
To view an image from the camera, simply turn on your computer. With the
current view from the camera displayed in Internet Explorer®:
1.
Click on the area of the screen that you want to view, and the camera
pans and tilts to the specified area.
2.
Zoom in and out on the current view by rotating the roller wheel on the
mouse.
I
F THE
C
AMERA
S
TOPS
W
ORKING
If the camera suddenly shuts off during operation, turn off the battery pack and
charge it. See Charging the Battery Pack on page 55 for complete charging
information.
If the battery pack is fully charged and the camera still will not turn on, contact
ETS-Lindgren for assistance.
Arranging Multi-Camera Images
1.
Power up all cameras. Allow cameras to complete self-test routine.
2.
Open Toshiba Camera Finder. Located in the Toshiba Network
Camera program group.
3.
Click Search. This displays all cameras connected to the network,
including the name and IP address for each.
4.
Open Internet Explorer and type IP address of one camera. Type
the IP address for one camera in the address bar in the browser
window.
Archived 6/3/13