Pre-operational checklist, Start-up and shutdown, Start-up – ETS-Lindgren 2071B Antenna Positioning Tower (Archived) User Manual
Page 44: Shutdown

44
|
Operation
Pre-Operational Checklist
□
Verify that the power lines are connected for the tower, controller, and any
other equipment to be used for testing.
□
Verify the fiber optic cables are connected.
□
Verify the antenna connected to the boom is securely mounted.
□
Connect the feed cable to the antenna.
□
Before moving the carrier on the mast up or down, verify there are no
people standing near the boom.
Start-Up and Shutdown
S
TART
-U
P
If you are unfamiliar with the operation of the Model 2090 (or next generation
ETS-Lindgren controller, if applicable), see the manual included with the
controller. The manual is also available for download from
After completing the pre-operational checks, turn on the Model 2090 by pressing
the power button.
S
HUTDOWN
Move the carrier to an accessible height to remove the antenna and confirm the
unit has come to a complete stop. Press the power button on the Model 2090 to
turn it off.
Archived 06/24/14