ETS-Lindgren 2071B Antenna Positioning Tower (Archived) - Manual (Page 19)

Assembly Instructions | 19
5.0 Assembly Instructions
Before connecting any components, follow the safety information
in the ETS-Lindgren Product Information Bulletin included with
your shipment.
This equipment should be installed, operated, and maintained by
qualified personnel.
Stay clear of all moving components on this equipment.
Never stand beneath the carrier, whether moving or stationary.
See the ETS-Lindgren Product Information Bulletin included with your
shipment for information on unpacking and acceptance procedures.
The Model 2070B and Model 2071B Antenna Positioning Towers should be
assembled in the location where it will be used. If movement to another location
is required after assembly, partial disassembly will be required for it to fit through
most doorways.
Required Tools

300 mm adjustable wrench (included)

3/16-in Allen wrench (hex key)
 Sawhorse or work bench
 Medium-sized level
Archived 06/24/14