ETS-Lindgren 2071B Antenna Positioning Tower (Archived) - Manual (Page 40)

40 | Operation
Model 2090 Multi-Device Controller
If you are unfamiliar with the operation of the Model 2090 (or next generation
ETS-Lindgren controller, if applicable), see the manual included with the
controller. The manual is also available for download from
www.ets-lindgren.com .
With the assembly of the tower complete, the controller must be connected to the
unit and power applied to both the motor base and controller. See the controller
manual for information on connecting the fiber optic cable.
Use the controller to check the clockwise (CW) and counterclockwise (CCW)
rotation in both directions by a few degrees. The position in degrees
increases (+) in the CW direction and decreases (-) in CCW direction.
E DIT C ONFIGURATION P ARAMETERS
Key Function
PARAM
To edit a configuration parameter:
 Press PARAM key to display the current
parameter.

Press PARAM key repeatedly to scroll
through the parameter list, displaying
each parameter.
STEP (INC/DEC)
To scroll up or down the parameter list while viewing a parameter.
Reduces the effort necessary to scan through a long parameter list
using the PARAM key.
LIMIT/POSITION Press any of the LIMIT/POSITION selection keys to return the display
to that selection.
Press any of the remaining motion keys to return the display to the
current position and execute that motion.
Press the PARAM key again to return to the last displayed parameter
in the list, allowing easy transition between parameter adjustment and
device operation.
Archived 06/24/14