ETS-Lindgren 2071B Antenna Positioning Tower (Archived) - Manual (Page 13)

Maintenance | 13
2.0 Maintenance
Before performing any maintenance, follow the safety
information in the ETS-Lindgren Product Information Bulletin
included with your shipment.
Do not attempt to service this unit until all electrical power has
been disconnected.
This equipment should be operated and maintained by qualified
personnel.
Disconnect all air supply lines when servicing pneumatic
components.
Service equipment in accordance with the maintenance schedule
provided.
Periodically check guy ropes and belt for wear.
Do not make any modifications to this unit without consulting the
factory directly.
Only use replacement parts and fasteners ordered directly from
the factory.
Maintenance of the Model 2070B and Model 2071B Antenna Positioning Towers
is limited to the instructions provided in the next section, Maintenance Schedule.
If you have any questions concerning maintenance, contact ETS-Lindgren
Customer Service.
Maintenance Schedule
E VERY T HREE M ONTHS

Inspect belt for wear, tension, and cracking.
 Check all screws and bolts to confirm that are tight per assembly instructions.
 Inspect bolts and hardware for breakage.
WARRANTY
Archived 06/24/14