Dynojet Flow Meter - Manual (Page 6)

Flow Meter User Guide
F L O W M E T E R
Introduction
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION
Flow Meter testing is a valuable troubleshooting tool. Testing with the flow meter will
help you determine if you need to rebuild the air pump. Be sure to read and follow all
warnings found throughout this manual.
For more detailed information on the air pump, refer to the Air Fuel Ratio Module
Installation and User Guide (P/N 98295110).
W ARNINGS
The sensor and the copper sample tube are hot. Before touching the sensor or
the sample tube, make sure it has cooled.
The sensor is not covered by a warranty. Be sure to read and understand the Air
Fuel Ratio Module Installation and User manual.
C ONVENTIONS U SED I N T HIS M ANUAL
The conventions used in this manual are designed to protect both the user and the
equipment.
T ECHNICAL S UPPORT
For assistance, please contact Dynojet Technical Support at 1-800-992-3525, or write
to Dynojet Research at 2191 Mendenhall Drive, North Las Vegas, NV 89081.
Visit us on the World Wide Web at www.dynojet.com where Dynojet provides state of
the art technical support, on-line shopping, 3D visualizations, and press releases
about our latest product line.
example of convention description
The Caution icon indicates a potential hazard to the
dynamometer equipment. Follow all procedures
exactly as they are described and use care when
performing all procedures.
The Warning icon indicates potential harm to the
person performing a procedure and/or the
dynamometer equipment.