Dynojet Flow Meter - Manual (Page 8)

Flow Meter User Guide
F L O W M E T E R
Flow Meter Testing
4
A SSEMBLING THE F LOW M ETER
Before performing any tests on the air pump you will need to assemble the flow
meter. Everything you need to correctly assemble the flow meter is included with
your flow meter kit (P/N 34803001).
1
Knead the bag containing the o-rings and the lubricant until all three o-rings are
coated.
Note: Be careful not to stretch or tear the o-rings.
2 Place an o-ring on each plug.
3 Secure both plugs to the flow meter using the black circular installation tool.
Note: To secure the plugs, turn the tool counter-clockwise torquing to less than
three inches/pound.
Figure 2: Assembling the Flow Meter
plug
o-ring
o-ring
plug