Removing the pump head service cover – Dynojet Flow Meter User Manual
Page 10
Flow Meter User Guide
F L O W M E T E R
Flow Meter Testing
6
R
EMOVING
THE
P
UMP
H
EAD
S
ERVICE
C
OVER
You will need to remove the pump head service cover before you can perform certain
tests with the flow meter. It is not necessary to remove the sensor when you remove
the service cover, but exercise extreme caution when handling and working near the
sensor.
The sensor is not covered by a warranty. The sensor is extremely fragile. Use
caution when handling it.
The sensor is hot. Before touching the sensor make sure it has cooled.
1
Remove the four No. 2 phillips head screws securing the pump head service
cover.
2
Remove the cover, gently flipping the cover over the sensor.
Figure 3: Removing the Pump Head Service Cover
pump head service cover
screw
sensor