BoonDocker ARCTIC CAT: 2012-14 ProClimb M8 Intercooled - Manual (Page 5)

BoonDocker tollfree: 877-522-7805 local: 208-542-4411 fax: 208-524-7381 www.boondockers.com 5
19. Slide the headlight cowl forward out of the tabs on
the headlight.
20. Un-plug the gauge, key, 12v outlet and remove the
cowl from the hood.
21. Using a flat headed screwdriver pry the factory air
temp sensor our of the intake behind the headlight.
This sensor will be re-used in the turbo kit so be care-
ful not to damage it during removal.
22. Remove the headlight by removing the four screws
holding it to the hood.
23. Remove the two remaining screws on the topside of
the hood that hold the airbox together. Flip over the
hood and remove the airbox.
24. Remove the connector from stock temp sensor. In-
stall the supplied resistor wire into the stock connec-
tor. Plug the connector back into the harness where
the stock temp sensor previously plugged in.