BoonDocker ARCTIC CAT: 2012-14 ProClimb M8 Intercooled - Manual (Page 13)

BoonDocker tollfree: 877-522-7805 local: 208-542-4411 fax: 208-524-7381 www.boondockers.com 13
67. Attach the expansion chamber to the turbo exhaust
inlet and secure using the stock springs that were
previously used to hold the Y-pipe to the expansion
chamber.
68. Install the muffler through the stock bellypan hole
and add a bead of high temp silicone on the muffler
ball connection.
69. Using the five supplied allen head bolts secure the ex-
haust outlet to the turbo. Secure the exhaust outlet
to the muffler using the three supplied short spring.
70. NOTE: Due to the complexity and time involved in
re-assembling the hood it is recommended to skip to
step 83, temporarily attach the stock gauge and start
the machine to make sure the turbo ki is installed cor-
rectly.
71. Measure 5-1/2” back from the front of edge of the
hood and drill a 5-3/4” hole in the hood so that the
intercooler fan will clear.
72. Measure 9” back from the front of the stock inner air-
box and mark a straight line.
73. Cut the stock airbox in two pieces. The front section
of the airbox will be discarded to leave room for the
intercooler to clear.