B&M 40505 BRACKET AND LEVER KIT, 4R100/E40D User Manual
Page 4
STEP 8. Remove selector shaft from case.
STEP 9. Slide B&M Selector Shaft into case.
Engage B&M Shaft with inner shift
lever and install nut. Use B&M Selector
Lever to visualize position of selector
shaft.
When inner shift lever is in the park
position, the selector lever should be
pointed downwards and to the left.
(Refer to picture on the right).
STEP 10. Install Selector Lever Retaining Pin.
TOOL: Plastic Mallet
* DO NOT HAMMER PIN ALL THE WAY
INTO THE CASE!
Pin should stick out from case
approximately 1/4” for future removal.
STEP 11. Install Detent Spring.
See also other documents in the category B&M For the car:
- 10225 SHIFT IMPROVER KIT (7 pages)
- 10227 TRANSPAK (8 pages)
- 50231 TRANSKIT (1 page)
- 10230 FLEXPLATE (1 page)
- 10280 CAST DEEP PAN (2 pages)
- 10300 DEEP PAN, CHRYSLER NAG-1 (3 pages)
- 10310 CAST ALUMINUM FRONT END COVER FOR DANA 30 IS CONSTRUCTED OF A356.0-T6 ALUMINUM. THIS RUGGED UNIT DIS (2 pages)
- 10311 CAST ALUMINUM REAR END COVER FOR DANA 35 WAS DESIGNED TO STRENGTHEN THE REAR END BY PREVENTING CASE (3 pages)
- 10312 Dana 44 Rear End Cover, A356.0-T6 Aluminum (3 pages)
- 10314 DANA 60/70 COVER WAS DESIGNED TO FIT BOTH DANA 60 AND DANA 70 DIFFERENTIALS. CONSTRUCTED OF A356.0-T (3 pages)
- 10315 Dana 80 cover was designed to strengthen the axle by preventing case distortion, ring gear & cap bea (3 pages)
- 10497 BRACKET & LEVER KIT (1 page)
- 117101 STRT TRANS TH700R4 CHV WITH MECH SP (7 pages)
- 120001 SHIFT PLUS 2 TRANS CONTROLLER (19 pages)
- 120002 TPS FOR CARBUERETED KITS (2 pages)
- 20260 SHIFT IMPROVER KIT (6 pages)
- 20261 SHIFT IMPROVER KIT (6 pages)
- 20280 CAST DEEP PAN (2 pages)
- 20297 KICKDOWN SWITCH KIT (1 page)
- 20480 NITROUS HOLESHOT 2400 (6 pages)
- 22300 NAG-1 Locking Trans Dipstick (2 pages)
- 30228 TRANSPAK (8 pages)
- 30262 SHIFT IMPROVER KIT (8 pages)
- 30280 CAST DEEP PAN (2 pages)
- 35229 TRANSPAK (8 pages)
- 35265 SHIFT IMPROVER KIT (8 pages)
- 35498 BRACKET AND LEVER KIT (2 pages)
- 40227 TRANSPAK (18 pages)
- 40263 SHIFT IMPROVER KIT (16 pages)
- 40281 CAST DEEP PAN (1 page)
- 40291 CAST DEEP PAN (2 pages)
- 40295 CAST DEEP PAN (2 pages)
- 40297 CAST ALUMINUM REAR END COVER, FORD 8.8 (3 pages)
- 40298 Cast Aluminum Rear End Cover for Ford 9.75 (3 pages)
- 40422 HOLESHOT 2400 C6 SMALL PILOT (6 pages)
- 40496 BRACKET AND LEVER KIT (3 pages)
- 40497 BRACKET AND LEVER KIT (2 pages)
- 40504 BRACKET AND LEVER KIT, 4R70W (7 pages)
- 45034 PRECISION SPORT SHIFTER - 08 & UP CORVETTE C6 & Z06 (11 pages)
- 45043 PRECISION SPORT SHIFTER - O4 + GTO (1 page)
- 45043 PRECISION SPORT SHIFTER - O4 + GTO (10 pages)
- 45044 PRECISION SPORT SHIFTER - C5 &C6 CORVETTE (15 pages)
- 45047 PRECISION SPORT SHIFTER - 88 - 00 HONDA (2 pages)
- 45048 PREC SHIFTER JEEP 99-01 JEEP WRANGL (12 pages)