AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 99)

93

System Reboot: when the DVR system reboot without abnormal condition, the system will
send out the alarm message.

Abnormal Reboot: when the DVR system reboot in irregular condition, the system will send
out the alarm message.

Recording is switched off: when the recording has been stopped, the system will send out
the alarm message.

Network is switched off: when the network connection of DVR system is lost, the system will
send out the alarm message.

Hard Disk failed: when the hard disk can’t work normally, the system will send out the alarm
message.

Temperature: set a temperature limited of system for system to alarm. When DVR system
temperature is over the temperature limited, the system will send out the alarm.

Illegal Entry: any objects move between selected regions which user has set up in Object
Counting section (see Chapter 4.2.1), the system will send out the alarm. Select the entry
(object moves from region 1 to 2 or from region 2 to 1) and and click the Detail to select the
camera and the times for system alarm.
 Trigger if once: Send out the alarm when the selected camera match the illegal entry
has selected.

Trigger if the amount exceeds: Send out the alarm when the selected camera and
illegal entry times match the illegal entry has selected.
i
Only the camera has been setup in Object Counting will be available for selecting in
Illegal Entry.