AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 91)

85
- Disable Alarm
Deactivate the alarm at the set time temporarily.
- Turn on Relay #
Active the relay at the set time. If there are no Relays are connected, Turn on Relay # function will
not display in drag down list. The Relay number will depend on how many relays are connected.
3. Specify to either schedule it weekly or one time. Click  to make a selection.
4. Right click the colored blocks to set the schedule. In the Select time dialog box, click to enable or
disable the portion user want to set. Click OK to accept the setting and Cancel to exit without saving the
setting.
5. User also can click All to select all. To store the setting, click Save. To remove the settings, click Clear.
6. To end Schedule Setting, click OK to exit and accept the setting and click Cancel to exit without saving
the setting.