AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 105)

99
(2) Mail
To check if it is working, click Test Account button.
From: Enter the sender e-mail address.
To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).
Subject: Enter the message title.
Message: Type the message.
(3) Email Notice Setting
- Notice Interval:Set the period of time before it sends another e-mail notice.
- Embedded image:Select the image size and set the number of frames.
- Attach image when sensor is triggered:When the sensor is triggered, the system will capture the
image and send the image to the certain e-mail address with the alarm message.
(4) Modem Dial up Setting
If you are using dial up modem, enable Auto Dial up check box and select the modem name. You may also
set the time to disconnect automatically, just enable the Auto Disconnect after check box and set time.
4.9.4 To Setup FTP Setting:
1. Next to the File Transmission via FTP check box, click Detail.
2. In the FTP Setting dialog box, enter the FTP IP, port, user ID and password.
3. In Number of Pic text box, enter the number of sequence images that want to send when file is
transmitting.
4. In Upload image when sensor is triggered, select the camera that the images will be capture and
send when the sensor is triggered.
5. Click OK to exit and save the setting and Cancel to exit without saving the setting.