AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 61)

55
Setup POS Device
There are some default POS devices. If user uses the POS device beside defaults, user can add new POS
device and rules. The POS device can be added up to 50 include defaults.
 Setup Standard POS Device

Add New POS Device
1. Click Add
2. Enter the POS device name in Name column
3. Select the Type as Standard
4. Click OK to save
5. To modify existing device, double click it.
6. Click Default can be reset back to original setting.

Add Rules
1. Select the POS device form device list
2. Click Add in Rules section
3. In Rule Setting windows, select Group. Each group has a limited number of times ; please refer to the
“Maximum” and “Remainder” information in Rule Setting windows. The Line End, Page End, and Bill End
group only can be set once.
- Line End: set a rule to separate each line.
- Page End: set a rule to switch page.
- Skip Cmd: set a rule to discard a string or character.