2 back panel, Iwh3216 touch – AVer IWH3216 Touch3216 Touch II user manual User Manual
Page 13
7
Name
Function
(14) Mode
Switch between preview, playback, and EMap mode.
In preview mode, user can switch between Preview, Playback and EMap
mode.
In playback mode, user can switch between Preview and Playback mode.
In EMap mode, user can switch between Preview and Emap mode.
1.3.2
Back Panel
1.3.2.1
IWH3216 Touch
Name
Function
(1) Video Loop Out(16CH)
Output the video signal to a CCTV monitor.
(2) Video In
Input the video camera signal and display it on channel 1~ 16.
(3) Audio In & Spot Monitor Input the audio signal to audio input device (16 channels) and two(2) spot monitor
output can display video on the Spot monitor when receive an alarm video.
i
The audio input device has its own power supply is necessary.
(4) Relay Out
Support 4 relay devices (Relay: 1A @ 125V AC/30V DC).
(5) Sensor In
Support up to 16 sensor devices.
(6) MIC In
To connect the microphone.
(7) USB port
For connecting USB interface devices such pen drive, external USB hard disk, mouse,
keyboard…etc.
(8) eSATA interface
For connecting with e-SATA storage.
(9) VGA Out 1/VGA Out 2
Output the video signal to LCD monitor(dual monitor)
(10) RS485
) or System Controller Pro connection.
(11) Power Plug
Connect the power cord into this port.
(12) RS232 port
For POS device connection.
(13) LAN 1/ LAN 2 Port
For Gigabit Ethernet connection.
(14) Audio output
For audio output device connection, such as speaker.