AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 131)

125
user uses CMS version 7.5 and connect to DVR server with version 7.7, and then, user has to
enable this option to make it work. It is due to that DVR system has some new security protocol in
DVR with version 7.3
and newer version, and it’s not compatible with old remote software.
- Enable White List
An access permit list for the remote accessing of DVR server. Enter the IP address and click Add.
Or, enter a range of IP address and click Add. To delete the IP from the list, select the IP and click
Delete button. To reset the input, click Clear button.
- Enable HandyViewer
Enable remote users to use a PDA or a mobile phone to access DVR server and select the video
size and quality. (See also Chapter 7.5 and 7.6)
- Network Bandwidth Limit
 By Channel: Set the network bandwidth by each channel.
 All: Set the total network bandwidth consumption limit.