AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 152)

146
6.5.3 To Use the PDAViewer
1. Run the PDAViewer in the Programs.
2. Familiarizing the PDAViewer buttons.
(7)
(6)
(5)
(3)
(4)
(8)
(9)
(10)
(1)
(2)
Name Function
(1) Connect Hook up to the DVR server. Make sure you are connected to internet.
When the iView screen appears, click Add to add DVR server.
Enter the server IP, port, user ID, password and select the connection type. Then, click
OK.
User can playback the recorded video from remote DVR server in PDAViewer (see
Chapter 6.6.4).
(2) Split Screen Mode Select between 2 screen display types. It also allows you to switch and view different
camera number or channels.
(3) About Display the PDA-Viewer software version.
(4) Minimize Reduce the size to taskbar.
(5) Exit Close the PDA-Viewer.
(6) Focus Adjust the focus of PTZ camera to produce clear image.
(7) Full Screen Use the entire screen to only display the video.
(8) Snapshot Capture and save the screen shot in *.bmp format.
(9) Zoom Zoom in and out the PTZ camera image.