In the case of an fd lens which has a, Chrome breech-lock mount ring or of an fl lens – Canon A-1 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

In the case of an FD lens which has a

chrome Breech-lock mount ring or of
an FL lens:

Mounting

1. Make sure the Breech-lock ring is locked

so that it cannot be turned. It will not

mount onto the ctimera otherwise.

2. Align the red dot of the Breech-lock ring

with the red dot on the camera body
above the camera mount.

3. In this position, fit the rear of the lens

into the camera body and turn the

Breech-lock ring clockwise until it is
tight.

Dismounting

1. Turn the Breech-lock ring counterclock

wise until it stops.

2. Pull the lens out from the camera body.