57 7 >0 «5 30 ft, Tl2 3 5 looq m, U|2i 4 si i 11ii22 a – Canon A-1 User Manual

Page 19: Stopped-down ae, Ae flash, Manual override, Cum m * in« a

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

57 7 >0 «5 30

1.tL2

3 5 lOoQ m

I I I I I I. I I I I

cum M * in« a

:■ U|2I 4 SI I 11II22 A «

Stopped-down AE

1. Disengage the lens aperture

ring from the “A” mark

(necessary only on FD lens).

2. Fold and push in the stop-

down lever.

3.Set the aperture by turning

the lens aperture ring.

See pp. 61-62 for detailed

explanation.

AE Flash

1. Insert the Speedlite 199A,

177A, 155A or 133A into

the A-l’s accessory shoe.

2.Set the ASA film speed on

the flash.

3. Make sure the lens aperture

ring is set to “A”.

4. Set the auto working aper

ture on the flash.

5.Switch the flash on.
6. Wait for the pilot lamp to

light up and “F” to appear
in the viewfinder.

See pp. 83-85 and instruc

tion booklet for Speedlite

199A,

177A,

155A or

133A for detailed explana

tion.

1 1

Manual Override

1. Disengage the lens aperture

ring from the “A” mark

(necessary only on FD lens).

2.Switch the AE mode selec

tor to Tv.

3.Select a shutter speed by

turning the AT dial.

4. Select an aperture by turn

ing the lens aperture ring

(using the camera-selected

aperture in the digital read
out as a basis if so desired).

See

for

detailed

explanation.