Handling the lens, Lens cap and rear dust cap, Lens cap – Canon A-1 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HANDLING THE LENS

Lens Cap and Rear Dust Cap

The front and rear lens caps should always

be on the lens when the lens is not on the

camera. For protection when the lens is
mounted on the camera but not in use,

please see to it that the front lens cap is

attached.

Lens Cap

Most Canon lenses are provided with a clip-
on front lens cap which is easily attached

and removed from the front of the lens by

pressing in the tabs on both sides of the cap.
This type of cap may also be attached to a

Canon filter screwed into the lens.