T? 5 d, D d 0 – Canon A-1 User Manual
Page 100
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. In programmed AE mode
Both the shutter speed LED and the aper
ture LED flash on and off simultaneously to
warn you of overexposure as well as under
exposure. In taking exposure readings, the
shutter
speed
and
aperture
combination
changes as they are programmed in the
camera. However, if there should be too
little light to be exposed correctly even at
the maximum aperture, the maximum aper
ture of the lens in use will remain fixed, and
the camera will work in aperture priority
AE, controlling the shutter speed to produce
correct exposure. If the camera exceeds the
limit of the meter coupling range, the
shutter speed and aperture LED values that
flash depend on the lens used and the ASA
film speed. When the data flashes on and off
in programmed AE, photography is no long
er possible in that mode unless you change
the light level or switch to a more appro
priate film.
! D D 0 -
t? 5 D
/
0
' / 1
X I /
- /
6
-
B . B
- I . H -
/ I \