Attach it to the camera, Tighten, Wireless selector settings – Canon Speedlite 430EX User Manual
Page 9: Attaching to the camera
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching to the Camera
•1
Loosen the locking ring.
• Turn the locking ring as shown by the
arrow to loosen it.
Attach it to the camera.
• Slip the Speedlite’s mounting foot all
the way into the hot shoe.
Tighten.
• Turn the locking ring as shown by the
arrow. The locking pin will protrude
from the mounting foot to further
secure the attachment.
• To detach the Speedlite, loosen the
locking ring until the locking pin
disengages. Then slip the Speedlite
out of the hot shoe.
o Before attaching or detaching the Speedlite, be sure to turn off the Speedlite.
Wireless Selector Settings
The wireless selector is for swKching
between normal flash shooting and
wireless flash shooting.
For normal flash shooting, be sure to set
the wireless selector to