Fe l, Fe lock – Canon Speedlite 430EX User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FE L

FE Lock

FE (flash exposure) lock enables you to lock the correct flash exposure

for any part of the picture.

With displayed on the LCD panel, you press the camera’s

button. If the camera does not have the

button, press

the <■)(■> button.

^ Focus the subject.

Press the

button. (S16)

• Aim the vievirfinder center over the

subject and press the

button.

^ A preflash will be fired to obtain a

flash exposure reading for the

subject.

► “FEL" will be displyed on the LCD

panel for 0.5 sec.

• Each time you press the

button, a preflash will be fired and a
new flash exposure reading will be
locked.

•

ir the subject is too

far

away and underexposure will result, the < Icon

will blink in the viewfinder. Move closer to the subject and try the FE lock

again.

• If is not displayed on the LCD panel, FE lock will not be

possible.

• If the subject Is too small, FE lock might not be very effective.