Setting manual flash with the slave unit – Canon Speedlite 430EX User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Manual Flash with the Slave Unit
m
Manual flash can be set manually with the slave unit. Do this in the
following cases:
(1) When you want to set the flash output with the slave units
individually for wireless or manual flash, as with studio flash units.
(2) When you use Speedlite Transmitter ST-E2 for wireless or manual
flash.
• Press the
►
will blink.
• Set the manual flash output (p. 19).
29