Using fully automatic wireless flash, Setting communication channel, Press the button so that blinks – Canon Speedlite 430EX User Manual
Page 27: Set the channel no
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Fully Automatic Wireless Flash
Flash exposure compensation and other settings set with the master
unit will also be automatically set in the slave units. Thus, you need not
make settings on the slave unit(s). Wireless flash with the following
settings can be done in the same way as with normal flash shooting.
• Flash exposure compensation
• High-speed sync (FP flash)
• FE lock
• FEB
‘ Manual flash
> Stroboscopic flash
@ • With FE lock, if even one Speedlite will result in underexposure, the <4 =
icon will blink in the viewfinder. Open the aperture more or move the
slave unit closer to the subject.
• With a wireless flash system, the master unit’s settings will not be
displayed on the 430EX's LCD panel.
Setting Communication Channel
If there is another Canon wireless flash system nearby, you can change
the channel No. to prevent signal confusion. Both the master and slave
units must be set to the same channel No.
Press the
so that
Set the channel No.
• Press the <®> button to select the
number, then press the <® > button.
27