Flash exposure compensation – Canon Speedlite 430EX User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

@ Flash Exposure Compensation

You can adjust the flash output as easily as normal exposure
compensation. Flash exposure compensation can be set up to ±3 stops
in 1/3-stop increments. (If the camera's exposure compensation is set in

1/2-stop increments, flash exposure compensation is set in 1/2-stop

increments.)

Press the <(^> button until the

<@> icon and compensation

amount start blinking.

Set the flash exposure

compensation amount.

• Press the <®> button to set the

amount.

• To cancel the flash exposure

compensation, set the amount to +0.

Press the <(®> button.

► The flash exposure compensation

amount will be set.

If flash exposure compensation has been set with both the Speedlite and

camera, the Speedlite’s flash exposure compensation amount will ovem'de

the camera's.

Using <®>

This is for setting various numeric settings. Pressing the (plus)

button increases the number, while the <3> (minus) button decreases

the number.