Bounce flash – Canon Speedlite 430EX User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bounce Flash
By pointing the flash head toward a wall or ceiling, the flash will bounce
off the surface before illuminating the subject. This can soften shadows
behind the subject for a more natural-looking shot. This is calied bounce
flash.
Set the Bounce Direction
Hold down the
If the flash coverage is set automatically, the flash coverage will be set
to 50mm.
The LCD panel will also display <- -> mm. (p.18)
• You can also set the flash coverage manually.
90°
О
• If the wall
Of
ceiling Is too far away, the bounced flash might be too weak
and result in underexposure.
• The wall or ceiling should be a plain, white color for high reflectance. If
the bounce surface is not white, a color cast may result in the picture.
• Alter you take the shot, if the flash exposure confirmation lamp does not
light, use a larger aperture opening and try again. With a digital camera,
you can also increase the ISO speed.
17