Canon 550EX User Manual
Page 89
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FEB (Flash Exposure Bracketing)
0.S07 1 1.5 2
3 4
6 9 13
SC
Correct exposure.
5
Check that the subject is within the
flash range displayed on the 550EX’s
LCD panel.
6
Check that the
i
and icons are
displayed in the viewfinder, then take
the picture.
7
Take the remaining two bracketed
shots. (If necessary, repeat steps 4
to
6
.)
Underexposure by 1 stop. Overexposure by 1 stop.
The film advances according to the camera’s current film advance mode.
Before taking the picture, make sure the flash is ready by checking that the SSOEX’s
pilot lamp is red or the
i
icon is displayed in the viewfinder. If the flash is not ready,
only normal AE mode pictures can be taken. The O (single-frame) film advance
mode is recommended.
When the flash is ready, you can continue taking the bracketed flash shots
Custom Function CF-1 can prevent the FEB setting from canceling automatically after the three
bracketed flash shots are taken See page 113
Custom Function CF-2 can change the sequence of the bracketed flash shots, See page 113.
89