Using the wide panel – Canon 550EX User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• Using the Wide Panel

Using the Zoom Button and Wide Panei

Pull out the built-in wide panel and flip it

down to cover the flash head. The flash

head’s zoom setting will be set to 17mm

automatically.

• Using the wide panel disables the

button

• Use the wide panel with flash head at the normal

downward tilt position.

• If the built-in wide panel is used and the flash head is turned or tilted for bounce flash,

the flash result may look uneven. The LCD panel display will blink as a warning.

• Do not pull out the wide panel too hard. Otherwise, the wide panel may come off.

If the wide panel comes off, the

button will not work. If this

happens, follow the procedure below.
• Use your linger to push in the panel as

shown by the arrow

• The

button will work again,

but the entire LCD panel display will
keep blinking Take the Speedlite to the

nearest Canon Service Center tor
repair