Using flash in full auto mode, So 5.5 i, T t l – Canon 550EX User Manual
Page 78: Set the camera’s picture-taking mode to, Set the camera’s picture-taking mode ' top, O set the 550ex’s flash mode to, 0 focus the subject, Icon is displayed in, The viewfinder, then take the picture
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Using Flash in Full Auto Mode
Set the camera’s picture-taking mode to
P
(Program AE) or □ (Full Auto).
Flash photography will then be as easy as normal AE photography. The
camera sets the aperture and shutter speed automatically to suit a wide
variety of lighting conditions including outdoor fill flash. The E-TTL autoflash
system sets the flash exposure automatically.
■i
Set the camera’s picture-taking mode
' toP.
TTL
Zoom 5umm
0,5 0.7 1
1.5 2 3 4 6 9 13 16 m
O Set the 550EX’s flash mode to
^ T T L
0 Focus the subject.
• The shutter speed and aperture will be
displayed in the viewfinder.
• The shutter speed will be set automatically at
1/60 sec. or taster (up to the top sync
speed) The aperture is also set at the same
time.
0.5 0.7 I
1.5
2
3 4
0 9 13 18
I
SO 5.5 i
A
Check that the subject is within the
^ flash range displayed on the 550EX’s
LCD panel.
c Check that the
i
icon is displayed in
^
the viewfinder, then take the picture.
78